我们通常希望有一台机器能经常挂在网上，现在有了adsl包月服务，这已经不是问题。但是最近adsl总是会断线，当我回家想从公司的机器上拷贝一些文件的时候，有时会发现已经连接不上了。所以我做个程序所要实现的功能有这么两个，一是用程序来实现adsl拨号，二是要定时检测网络状态，三是要在启动机器时运行（既注册为服务）
我们先看一下如何做一个拨号程序
首先建一个ras拨号的单元文件（这是网上搜集的）
unit Ras;
interface
uses
Windows, SysUtils;
{$DEFINE WINVER400}
const
RasUnitVersion = 110;
CopyRight : String = RasUnit (c) 97-98 F. Piette V1.10 ;
rasapi32 = rasapi32.dll;
UNLEN = 256; // Maximum user name length
PWLEN = 256; // Maximum password length
CNLEN = 15; // Computer name length
DNLEN = CNLEN; // Maximum domain name length
RAS_MaxDeviceType = 16;
RAS_MaxPhoneNumber = 128;
RAS_MaxIpAddress = 15;
RAS_MaxIpxAddress = 21;
{$IFDEF WINVER400}
RAS_MaxEntryName = 256;
RAS_MaxDeviceName = 128;
RAS_MaxCallbackNumber = RAS_MaxPhoneNumber;
{$ELSE}
RAS_MaxEntryName = 20;
RAS_MaxDeviceName = 32;
RAS_MaxCallbackNumber = 48;
{$ENDIF}
RAS_MaxAreaCode = 10;
RAS_MaxPadType = 32;
RAS_MaxX25Address = 200;
RAS_MaxFacilities = 200;
RAS_MaxUserData = 200;
RASCS_OpenPort = 0;
RASCS_PortOpened = 1;
RASCS_ConnectDevice = 2;
RASCS_DeviceConnected = 3;
RASCS_AllDevicesConnected = 4;
RASCS_Authenticate = 5;
RASCS_AuthNotify = 6;
RASCS_AuthRetry = 7;
RASCS_AuthCallback = 8;
RASCS_AuthChangePassword = 9;
RASCS_AuthProject = 10;
RASCS_AuthLinkSpeed = 11;
RASCS_AuthAck = 12;
RASCS_ReAuthenticate = 13;
RASCS_Authenticated = 14;
RASCS_PrepareForCallback = 15;
RASCS_WaitForModemReset = 16;
RASCS_WaitForCallback = 17;
RASCS_Projected = 18;
{$IFDEF WINVER400}
RASCS_StartAuthentication = 19;
RASCS_CallbackComplete = 20;
RASCS_LogonNetwork = 21;
{$ENDIF}
RASCS_SubEntryConnected = 22;
RASCS_SubEntryDisconnected= 23;
RASCS_PAUSED = $1000;
RASCS_Interactive = RASCS_PAUSED;
RASCS_RetryAuthentication = (RASCS_PAUSED + 1);
RASCS_CallbackSetByCaller = (RASCS_PAUSED + 2);
RASCS_PasswordExpired = (RASCS_PAUSED + 3);
RASCS_DONE = $2000;
RASCS_Connected = RASCS_DONE;
RASCS_Disconnected = (RASCS_DONE + 1);
// If using RasDial message notifications, get the notification message code
// by passing this string to the RegisterWindowMessageA() API.
// WM_RASDIALEVENT is used only if a unique message cannot be registered.
RASDIALEVENT = RasDialEvent;
WM_RASDIALEVENT = $CCCD;
// TRASPROJECTION
RASP_Amb = $10000;
RASP_PppNbf = $0803F;
RASP_PppIpx = $0802B;
RASP_PppIp = $08021;
RASP_Slip = $20000;
type
THRASCONN = THandle;
PHRASCONN = ^THRASCONN;
TRASCONNSTATE = DWORD;
PDWORD = ^DWORD;
PBOOL = ^BOOL;
TRASDIALPARAMS = packed record
dwSize : DWORD;
szEntryName : array [0..RAS_MaxEntryName] of Char;
szPhoneNumber : array [0..RAS_MaxPhoneNumber] of Char;
szCallbackNumber : array [0..RAS_MaxCallbackNumber] of Char;
szUserName : array [0..UNLEN] of Char;
szPassword : array [0..PWLEN] of Char;
szDomain : array [0..DNLEN] of Char;
{$IFDEF WINVER401}
dwSubEntry : DWORD;
dwCallbackId : DWORD;
{$ENDIF}
szPadding : array [0..2] of Char;
end;
PRASDIALPARAMS = ^TRASDIALPARAMS;
TRASDIALEXTENSIONS = packed record
dwSize : DWORD;
dwfOptions : DWORD;
hwndParent : HWND;
reserved : DWORD;
end;
PRASDIALEXTENSIONS = ^TRASDIALEXTENSIONS;
TRASCONNSTATUS = packed record
dwSize : DWORD;
RasConnState : TRASCONNSTATE;
dwError : DWORD;
szDeviceType : array [0..RAS_MaxDeviceType] of char;
szDeviceName : array [0..RAS_MaxDeviceName] of char;
szPadding : array [0..1] of Char;
end;
PRASCONNSTATUS = ^TRASCONNSTATUS;
TRASCONN = packed record
dwSize : DWORD;
hRasConn : THRASCONN;
szEntryName : array [0..RAS_MaxEntryName] of char;
{$IFDEF WINVER400}
szDeviceType : array [0..RAS_MaxDeviceType] of char;
szDeviceName : array [0..RAS_MaxDeviceName] of char;
{$ENDIF}
szPadding : array [0..0] of Char;
end;
PRASCONN = ^TRASCONN;
TRASENTRYNAME = packed record
dwSize : DWORD;
szEntryName : array [0..RAS_MaxEntryName] of char;
szPadding : array [0..2] of Char;
end;
PRASENTRYNAME = ^TRASENTRYNAME;
TRASENTRYDLG = packed record
dwSize : DWORD;
hWndOwner : HWND;
dwFlags : DWORD;
xDlg : LongInt;
yDlg : LongInt;
szEntry : array [0..RAS_MaxEntryName] of char;
dwError : DWORD;
Reserved : DWORD;
Reserved2 : DWORD;
szPadding : array [0..2] of Char;
end;
PRASENTRYDLG = ^TRASENTRYDLG;
TRASPROJECTION = integer;
TRASPPPIP = record
dwSize : DWORD;
dwError : DWORD;
szIpAddress : array [0..RAS_MaxIpAddress] of char;
end;
function RasDialA(RasDialExtensions: PRASDIALEXTENSIONS;
PhoneBook : PChar;
RasDialParams : PRASDIALPARAMS;
NotifierType : DWORD;
Notifier : Pointer;
RasConn : PHRASCONN
): DWORD; stdcall;
function RasGetErrorStringA(
uErrorValue : DWORD; // error to get string for
szErrorString : PChar; // buffer to hold error string
cBufSize : DWORD // size, in characters, of buffer
): DWORD; stdcall;
function RasHangupA(RasConn: THRASCONN): DWORD; stdcall;
function RasConnectionStateToString(nState : Integer) : String;
function RasGetConnectStatusA(
hRasConn: THRASCONN; // handle to RAS connection of interest
lpRasConnStatus : PRASCONNSTATUS // buffer to receive status data
): DWORD; stdcall;
function RasEnumConnectionsA(
pRasConn : PRASCONN; // buffer to receive connections data
pCB : PDWORD; // size in bytes of buffer
pcConnections : PDWORD // number of connections written to buffer
) : DWORD; stdcall
function RasEnumEntriesA(
Reserved : Pointer; // reserved, must be NIL
szPhonebook : PChar; // full path and filename of phonebook file
lpRasEntryName : PRASENTRYNAME; // buffer to receive entries
lpcb : PDWORD; // size in bytes of buffer
lpcEntries : PDWORD // number of entries written to buffer
) : DWORD; stdcall;
function RasGetEntryDialParamsA(
lpszPhonebook : PChar; // pointer to the full path and filename of the phonebook file
lprasdialparams : PRASDIALPARAMS; // pointer to a structure that receives the connection parameters
lpfPassword : PBOOL // indicates whether the users password was retrieved
) : DWORD; stdcall;
function RasEditPhonebookEntryA(
hWndParent : HWND; // handle to the parent window of the dialog box
lpszPhonebook : PChar; // pointer to the full path and filename of the phonebook file
lpszEntryName : PChar // pointer to the phonebook entry name
) : DWORD; stdcall;
//function RasEntryDlgA(
// lpszPhonebook : PChar; // pointer to the full path and filename of the phone-book file
// lpszEntry : PChar; // pointer to the name of the phone-book entry to edit, copy, or create
// lpInfo : PRASENTRYDLG // pointer to a structure that contains additional parameters
// ) : DWORD; stdcall;
function RasCreatePhonebookEntryA(
hWndParent : HWND; // handle to the parent window of the dialog box
lpszPhonebook : PChar // pointer to the full path and filename of the phonebook file
) : DWORD; stdcall;
function RasGetProjectionInfoA(
hRasConn : THRASCONN; // handle that specifies remote access connection of interest
RasProjection : TRASPROJECTION; // specifies type of projection information to obtain
lpProjection : Pointer; // points to buffer that receives projection information
lpcb : PDWORD // points to variable that specifies buffer size
) : DWORD; stdcall;
function RasGetIPAddress: string;
implementation
{* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *}
function RasConnectionStateToString(nState : Integer) : String;
begin
case nState of
RASCS_OpenPort: Result := Opening Port;
RASCS_PortOpened: Result := Port Opened;
RASCS_ConnectDevice: Result := Connecting Device;
RASCS_DeviceConnected: Result := Device Connected;
RASCS_AllDevicesConnected: Result := All Devices Connected;
RASCS_Authenticate: Result := Starting Authentication;
RASCS_AuthNotify: Result := Authentication Notify;
RASCS_AuthRetry: Result := Authentication Retry;
RASCS_AuthCallback: Result := Callback Requested;
RASCS_AuthChangePassword: Result := Change Password Requested;
RASCS_AuthProject: Result := Projection Phase Started;
RASCS_AuthLinkSpeed: Result := Link Speed Calculation;
RASCS_AuthAck: Result := Authentication Acknowledged;
RASCS_ReAuthenticate: Result := Reauthentication Started;
RASCS_Authenticated: Result := Authenticated;
RASCS_PrepareForCallback: Result := Preparation For Callback;
RASCS_WaitForModemReset: Result := Waiting For Modem Reset;
RASCS_WaitForCallback: Result := Waiting For Callback;
RASCS_Projected: Result := Projected;
{$IFDEF WINVER400}
RASCS_StartAuthentication: Result := Start Authentication;
RASCS_CallbackComplete: Result := Callback Complete;
RASCS_LogonNetwork: Result := Logon Network;
{$ENDIF}
RASCS_SubEntryConnected: Result := ;
RASCS_SubEntryDisconnected: Result := ;
RASCS_Interactive: Result := Interactive;
RASCS_RetryAuthentication: Result := Retry Authentication;
RASCS_CallbackSetByCaller: Result := Callback Set By Caller;
RASCS_PasswordExpired: Result := Password Expired;
RASCS_Connected: Result := Connected;
RASCS_Disconnected: Result := Disconnected;
else
Result := Connection state # + IntToStr(nState);
end;
end;
{* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *}
function RasGetIPAddress: string;
var
RASConns : TRasConn;
dwSize : DWORD;
dwCount : DWORD;
RASpppIP : TRASPPPIP;
begin
Result := ;
RASConns.dwSize := SizeOf(TRASConn);
RASpppIP.dwSize := SizeOf(RASpppIP);
dwSize := SizeOf(RASConns);
if RASEnumConnectionsA(@RASConns, @dwSize, @dwCount) = 0 then begin
if dwCount > 0 then begin
dwSize := SizeOf(RASpppIP);
RASpppIP.dwSize := SizeOf(RASpppIP);
if RASGetProjectionInfoA(RASConns.hRasConn,
RASP_PppIp,
@RasPPPIP,
@dwSize) = 0 then
Result := StrPas(RASpppIP.szIPAddress);
end;
end;
end;
{* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *}
function RasDialA; external rasapi32 name RasDialA;
function RasGetErrorStringA; external rasapi32 name RasGetErrorStringA;
function RasHangUpA; external rasapi32 name RasHangUpA;
function RasGetConnectStatusA; external rasapi32 name RasGetConnectStatusA;
function RasEnumConnectionsA; external rasapi32 name RasEnumConnectionsA;
function RasEnumEntriesA; external rasapi32 name RasEnumEntriesA;
function RasGetEntryDialParamsA; external rasapi32 name RasGetEntryDialParamsA;
function RasEditPhonebookEntryA; external rasapi32 name RasEditPhonebookEntryA;
//function RasEntryDlgA; external rasapi32 name RasEntryDlgA;
function RasCreatePhonebookEntryA; external rasapi32 name RasCreatePhonebookEntryA;
function RasGetProjectionInfoA; external rasapi32 name RasGetProjectionInfoA;
{* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *}
end.
有了这些函数，然后可以做自己的拨号程序了
program AutoDial;
{$APPTYPE CONSOLE}
uses
SysUtils,IniFiles,Windows,Winsock,
Ras in ras.pas;
var
DirPath,EntryName,UserName,PassWord,VisitHost,VisitUrl,VisitParam:string;
CheckVisit:Boolean;
nRasConnCount: DWORD;
aRasConn:array [0..10] of TRASCONN;
hRasConn:THRASCONN;
f:TIniFile;
IsConnected:boolean;
procedure LogMessage(Msg:string);
var
LogFile:TextFile;
begin
try
AssignFile(LogFile,DirPath+Log.txt);
Append(LogFile);
WriteLn(LogFile,DateTimeToStr(Now)+,+Msg);
CloseFile(LogFile);
WriteLn(DateTimeToStr(Now)+,+Msg);
except
end;
end;
function GetIP:string;
var
IPAddr : String;
begin
IPAddr := RasGetIPAddress;
if IPAddr > then
result:=IPAddr
else
result:=Unknown;
end;
function InitSocket(var ASocket:TSocket;AAddr:string;APort:integer;ATimeOut:integer):integer;
var
MyWSA: WSAData;
SIN: TSockAddr;
begin
Result:=0;
If WSAStartup(MAKEWORD(2,2), MyWSA) <> 0 Then //初始化
Begin
WSACleanup;
Result:=1;
Exit;
end;
ASocket:=Socket(AF_INET, SOCK_STREAM, IPPROTO_TCP); //创建socket
If ASocket = INVALID_SOCKET Then
Begin
WSACleanup;
Result:=2;
Exit;
End;
SIN.sin_family := AF_INET;
SIN.sin_port := htons(APort);
SIN.sin_addr.S_addr := inet_addr(PChar(AAddr));
If connect(ASocket, SIN, SizeOf(SIN)) = SOCKET_ERROR Then
Begin
CloseSocket(ASocket);
WSACleanup;
Result:=9;
Exit;
end;
if SetSockOpt(ASocket,SOL_SOCKET,SO_RCVTIMEO,PChar(@ATimeOut),SizeOf(ATimeOut))=SOCKET_ERROR then //设置接收超时为3秒
begin
CloseSocket(ASocket);
WSACleanup;
Result:=6;
Exit;
end;
if SetSockOpt(ASocket,SOL_SOCKET,SO_SNDTIMEO,PChar(@ATimeOut),SizeOf(ATimeOut))=SOCKET_ERROR then //设置发送超时为3秒
begin
CloseSocket(ASocket);
WSACleanup;
Result:=7;
Exit;
end;
end;
procedure UninitSocket(ASocket:TSocket);
begin
try
CloseSocket(ASocket); //关闭socket
WSACleanup;
except
end;
end;
procedure AfterConnect;//等拨号完成后，访问指定页面，借此将ip地址记录下来，这样我们就可以在其他地方知道拨号后新的ip地址了
var
hSocket: TSocket;
SAddr,sendtext:string;
Sendbuf:array[0..1024] of char;
HostEnt:PHostEnt;
begin
try
if not CheckVisit then
begin
LogMessage(----------+GetIp+----------);
IsConnected:=True;
exit;
end;
HostEnt:=gethostbyname(pchar(VisitHost));
if HostEnt<>nil then
begin
with HostEnt^ do
SAddr:=Format(%d.%d.%d.%d,[byte(h_addr^[0]),byte(h_addr^[1]),byte(h_addr^[2]),byte(h_addr^[3])]);
end;
InitSocket(hSocket,SAddr,80,10000);
sendtext:=POST +VisitUrl+ HTTP/1.1+#13#10
+Accept: image/gif, image/x-xbitmap, image/jpeg, image/pjpeg, application/vnd.ms-excel, application/vnd.ms-powerpoint, application/msword, */*+#13#10
+Referer: +#13#10
+Accept-Language: zh-cn+#13#10
+Content-Type: application/x-www-form-urlencoded+#13#10
+Accept-Encoding: gzip, deflate+#13#10
+User-Agent: Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1; .NET CLR 1.0.3705)+#13#10
+Host: +VisitHost+#13#10
+Content-Length: +inttostr(length(VisitParam))+#13#10
+Connection: Keep-Alive+#13#10
+Cache-Control: no-cache+#13#10
+Cookie: +#13#10
+#13#10
+VisitParam+#13#10;
FillChar(sendbuf,sizeof(sendbuf),0);
StrLCopy(sendbuf,PChar(sendtext),length(sendtext));
Send(hSocket,sendbuf,length(sendtext),0);
UninitSocket(hSocket);
LogMessage(----------+GetIp+----------);
IsConnected:=True;
except
end;
end;
procedure Disconnected;
begin
try
if hRasConn <> 0 then
begin
RasHangUpA(hRasConn);
hRasConn:= 0;
end;
except
end;
end;
procedure GetActiveConn;
var
dwRet : DWORD;
nCB : DWORD;
Buf : array [0..255] of Char;
begin
try
aRasConn[0].dwSize := SizeOf(aRasConn[0]);
nCB := SizeOf(aRasConn);
dwRet := RasEnumConnectionsA(@aRasConn, @nCB, @nRasConnCount);
if dwRet <> 0 then begin
RasGetErrorStringA(dwRet, @Buf[0], SizeOf(Buf));
LogMessage(Buf);
end;
except
end;
end;
function GetActiveConnHandle(szName : String) : THRASCONN;
var
I : Integer;
begin
GetActiveConn;
if nRasConnCount > 0 then begin
for I := 0 to nRasConnCount - 1 do begin
if StrIComp(PChar(szName), aRasConn[I].szEntryName) = 0 then begin
Result := aRasConn[I].hRasConn;
Exit;
end;
end;
end;
Result := 0;
end;
function CheckConn(FEntryName:string):boolean;
begin
hRasConn := GetActiveConnHandle(FEntryName);
if hRasConn <> 0 then
result:=True
else
Result:=False;
end;
procedure RasDialFunc(unMsg : DWORD;FRasConnState : TRASCONNSTATE;FdwError : DWORD); stdcall;
var
Buf: array [0..255] of Char;
begin
try
LogMessage(RasConnectionStateToString(FRasConnState));
if FRasConnState = RASCS_Connected then begin
AfterConnect;
end
else if FRasConnState = RASCS_Disconnected then begin
RasGetErrorStringA(FdwError, @Buf[0], SizeOf(Buf));
LogMessage(Buf);
Disconnected;
end;
except
end;
end;
procedure Dial(FEntryName, FUserName, FPassword : String);
var
rdParams : TRASDIALPARAMS;
dwRet : DWORD;
Buf : array [0..255] of Char;
begin
try
hRasConn := GetActiveConnHandle(FEntryName);
if hRasConn <> 0 then begin
LogMessage(Connection already active);
Exit;
end;
// setup RAS Dial Parameters
FillChar(rdParams, SizeOf(rdParams), 0);
rdParams.dwSize := SizeOf(TRASDIALPARAMS);
strCopy(rdParams.szUserName, PChar(FUserName));
strCopy(rdParams.szPassword, PChar(FPassword));
strCopy(rdParams.szEntryName, PChar(FEntryName));
rdParams.szPhoneNumber[0] := #0;
rdParams.szCallbackNumber[0] := *;
rdParams.szDomain := *;
hRasConn := 0;;
dwRet := RasDialA(nil, nil, @rdParams, 0, @RasDialFunc, @hRasConn);
if dwRet <> 0 then
begin
RasGetErrorStringA(dwRet, @Buf[0], SizeOf(Buf));
LogMessage(IntToStr(dwRet) + + Buf);
Disconnected;
end
else
begin
LogMessage(Dialing + FEntryName + );
end;
except
end;
end;
begin
try
DirPath:=ExtractFilePath(ParamStr(0));
f:=TiniFile.Create(DirPath+conf.ini);
EntryName:=f.ReadString(RasDial,EntryName,);
UserName:=f.ReadString(RasDial,UserName,);
PassWord:=f.ReadString(RasDial,PassWord,);
CheckVisit:=f.ReadBool(RasDial,Visit,False);
VisitHost:=f.ReadString(RasDial,Host,);
VisitUrl:=f.ReadString(RasDial,Url,);
VisitParam:=f.ReadString(RasDial,Param,);
f.Free;
if not CheckConn(EntryName) then
begin
Dial(EntryName,UserName,PassWord);
end
else
begin
LogMessage(----------+GetIp+----------);
IsConnected:=True;
end;
while not IsConnected do
sleep(1000);
except
end;
end.
然后编译后产生一个console application，
编写自己的conf.ini，填入自己的连接名称，用户名，密码等参数
运行该程序，就可以自动拨号了。
源码下载
